FESTOOL Sliding compound mitre saw KAPEX KS 60 E

FESTOOL Sliding compound mitre saw KAPEX KS 60 E

$1,599.00

• Benefits •
• Description •
• Specification •

• Compact and lightweight, with ergonomic handles and cord holder

• LED spotlight to show cutting lines precisely (included in the set or available as an accessory)

• The inclination angle of up to 47°/46° on each side and the miter angle of up to 60° on each side

• Achieve Maximum results with Minimal waste

• Innovative Design down to the finest detail
Each and every gram of weight that isn't absolutely necessary for the task at hand has been eliminated from the new KAPEX KS 60. The impressive features of this tool include a mitre angle on both sides of up to 60 degrees, an inclination angle on both sides of up to 46 or 47 degrees, flush-mounted guide rods for a small footprint, and a cord holder and transport safety device for added convenience. The Festool saw blade is reliably and smoothly guided thanks to the guide's twin columns and two bearings. The KAPEX KS 60 strikes the ideal balance between portability, adaptability, and superior results thanks to a number of thoughtful additions like an LED spotlight, a pull-out extension table, an extra groove function, and a bevel.
Technical Data

Power consumption 1 200 W

Idle engine speed 1 300 - 3 500 min⁻¹

Saw blade diameter 216.00 mm

Cutting depth 90°/90° 305 x 60 mm

Cutting depth at 45°/90° 215 x 60 mm

Cutting depth 45°/45° (left) 215 x 40 mm

Inclination angle 47/46 °

Mitre angle 60/60 °

Dimensions (W x D x H) 661 x 475 x 430 mm

Dust extraction connection diameter 27/36 mm

Cable length 3.70 m

Product weight 17.90 kg

Cutting depth 60°/90° 150 x 60 mm

Cutting depth 45°/45° (right) 215 x 20 mm

Drive type Mains

Sawing: Total vibration average, Ah 2.50 m/s²

Sawing: Standards series EN EN 62841

Sawing: Uncertainty (noise) K 3.00 dB

Sawing: A-weighted sound power level, LWA 100.00 dB(A)

Sawing: A-weighted sound pressure level, LpA 91.00 dB(A)

Sawing: Uncertainty (vibration) K 1.50 m/s²

Features & Benefits of the FESTOOL Sliding compound mitre saw KAPEX KS 60 E

Freedom to roam

Compact and lightweight design achieved through the use of flush-mounted guide rods; features ergonomic carrying handles, cord holder, and transport safety device.

The highest level of accuracy

Double bearings. Cutting with the Festool saw is a breeze thanks to the twin-column guide that keeps the blade precisely in place.

Wide range of applications

It's thanks to the 60-degree mitre angles on both ends. Using the snaps on the table, the desired mitre angle can be quickly locked into place for quick selection. All other angles can be chosen and changed at will.

Extremely versatile

Thanks to an inclination angle on both sides of up to 47 or 46 degrees. The angle is adjusted via the highly accessible and easy to use clamp in combination with the extremely precise scale.

Also for long workpieces

The extension table, which can be pulled out separately, provides reliable and accurate support for long workpieces as well.

Dust-free conditions that allow for a clear view of the workpiece

The chips are vacuumed up at their source by the extraction system and a Festool mobile dust extractor, making for a clean and safe workplace.

The groove feature adds even more adaptability.

The cutting depth limiter allows for quick and accurate grooving as well.

Saves time, saves errors

The SM-KS bevel makes the rapid measurement of interior and exterior angles and subsequent transfer to the saw simple and precise.

Superior visibility of the scribe mark

The shadow of the saw blade is cast onto the material by the LED spotlight (included in all SET versions), illuminating clean cutting lines.

Clever accessories

The additional feet (available as accessories) raise the KS 60 workbench to the exact height of a Systainer SYS 1. This can therefore also be used as a workbench and enables long workpieces to be reliably supported.

Quick changes

When the spindle stop is in place, changing the saw blade is a simple and risk-free process. The appropriate Allen key is kept in a secure location, making it easy to access whenever you need it.

For right and left handed users

Switch and handle are in a central position so they are just as easy for right-handed and left-handed users to operate.

Always adapted to the working material

Variable speed preselection for adapting to the working material.

More mobile with the base frame

Take the Kapex on the go with the base frame for the KS 60 is a stand and a transport frame in one – for even easier transportation of the KAPEX KS 60. (optional in some units)

Systems get it done even better

With the right saw blades for every material. Universal saw blade, fine tooth saw blade and special saw blades for aluminium, acrylic, plastics and many other materials. We have the perfect saw blade for every material from solid wood and panel materials to building panels and plasterboard, hard and soft plastics, non-ferrous metals, Plexiglas and aluminium through to laminate and mineral materials.

FESTOOL Sliding compound mitre saw KAPEX KS 60 E

Technical Data